Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide
21
3.4.1
Intel RAID Adapter RMSP3DD080F Electrical, Thermal and Atmospheric Requirements.
List of operating conditions for the Intel® RAID adapter RMSP3DD080F:
•
Power Supply voltage at the 12V rail (from PCI edge connector): 12V ± 8 percent.
•
Power Supply voltage at the 3.3V rail (from PCI edge connector): 13.3V ± 9 percent.
•
Relative humidity range is 20 percent to 80 percent non-condensing
•
Temperature range: 10 °C to +55 °C (with or without the RMFBU module attached)
List of non-operating conditions (while in storage or in transit) for the Intel® RAID adapter
RMSP3DD080F:
•
Relative humidity range is 5 percent to 90 percent non-condensing.
•
Temperature range: –40°C to +70°C without battery backup unit
•
Temperature range: 0°C to +45°C with battery backup unit
3.4.2
Intel RAID Adapter RMSP3DD080F Power Consumption.
The following table describes the power consumption of the Intel® RAID adapter RMSP3DD080F
under the following states:
State 1: While sitting idle at the DOS prompt or the EFI shell.
State 2: During a drive stress test; average over 20 minutes of sustained operation
Power Mode
State 1
State 2
Typical
Typical
RMFBU learn
3.3V Supply
0.24W
0.28W
+ 12 Supply
13.56W
13.80W
6W
3.3V Auxillary Supply
0.03W
0.08W
Total Power
13.83W
14.16W
6W
3.5
Intel RAID Adapter RMSP3MD088F
The Intel® RAID module RMSP3MD088Fis an entry level tri-mode RAID adapter with 8 internal ports based
on the Avago® SAS3508 SAS I/O controller (IOC). It supports RAID levels 0, 1,5 and 10. It has an x8 PCI
