background image

Intel® RAID Controller RS2WC040 Hardware User’s Guide

33

Electromagnetic Compatibility Notices

FCC Verification Statement (USA) :

This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) This device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that 
may cause undesired operation.

Intel Corporation

5200 N.E. Elam Young Parkway

Hillsboro, OR 97124-6497

Phone: 1-800-628-8686 

This equipment has been tested and found to comply with the limits for a Class A 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a commercial 
installation. This equipment generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

Reorient or relocate the receiving antenna. 

Increase the separation between the equipment and the receiver. 

Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected. 

Consult the dealer or an experienced radio/TV technician for help. 

Intel is not responsible for any radio or television interference caused by 
unauthorized modification of this equipment for substitution or attachment of 
connecting cables and equipment other than those specified by Intel. The correction 
of interferences caused by such unauthorized modification, substitution, or 
attachment will be the responsibility of the user. 

This RAID Controller has been tested to comply with FCC standards for office use. 

ICES-003 (Canada) This digital apparatus does not exceed the Class A limits 
for radio noise emissions from digital apparatus set out in the interference-
causing equipment standard entitled "Digital Apparatus," ICES-003 of the 
Canadian Department of Communications. 

Cet appareil numúrique respecte les limites bruits radioúlectriques applicables 
aux appareils numúriques de Classe Aprescrites dans la norme sur le matúriel 
brouilleur: "Appareils Numúriques", NMB-003 údictúe par le Ministre 
Canadien des Communictations. 

Europe (CE Declaration of Conformity) This product has been tested in 
accordance too, and complies with the Low Voltage Directive (2006/95/EC) 

Содержание RS2WC040













































Отзывы: