Intel RMS3CC040, Быстрая установка руководство пользователя

Страница: 7 / 10

3
General Installation Process
6
Configure and Install the
SAS/SATA Devices
Configure and install the SAS devices, SATA devices, or
both in the host computer case.
Refer to the documentation for the devices for any
preinstallation configuration requirements.
7
Connect the RAID Module to
the SAS/SATA Devices
NOTE: Both non-expander backplanes (one cable per drive)
and expander backplanes (one or two total cables) are
supported. Drive power cables (not shown) are required.
A
Connect the wide end of the provided cable to the up SFF-8643
connector (ports 0-3).
B
Push the cable into the SFF-8643 connector until it makes a slight
click.
C
If using more than four drives, connect the wide end of the second
cable to the down SFF-8643 connector (ports 4-7).
D
Connect the other ends of the cables to SATA drives or to the ports
on a SATA or SAS backplane.
C
A
D
D
AF006556
B
5
(Optional) Connect the RMFBU5
to the Remote Super Capacitor
Pack Module
A
Connect the SuperCap cable with the remote Super Capacitor Pack
module. Align the cable connectors to make sure that they are
connected correctly.
B
Insert the other 9-pin connector of the SuperCap cable to RMFBU5
connector J1.
C
Mount the remote Super Capacitor Pack module to the server
chassis. Refer to the related server service guide for details.
A
B
AF006557