Intel® Server System R2600SR Setup and Service Guide
9
2.
System Overview and Setup
This chapter provides service personnel the information necessary to set up the Intel® Server System
R2600SR L9 system. Illustrations identify and locate the system features and procedures to install the
system in a rack environment and configure the system, including updating and backing up firmware. The
system comes fully assembled, with all components necessary to be fully functional at first power-on. Once
the system is physically set up in the operating environment and updated to the latest available firmware
version, its initial configuration can begin. Configuration includes setting up user and administrator accounts,
designating network settings for local and remote connectivity, and backing up the system.
Please refer to Section 1.4 for a list of the documents available for this product family.
This chapter provides instructions for removing and installing system components considered as field
replaceable (field-replaceable units, or FRUs). The Intel
®
Server System R2600SR product family features a
modular design, allowing for serviceability at the compute node level without having to power off the entire
system. Except for the system fans, components common to all compute nodes (EIOM, SMM and PSUs) in
the system can only be serviced after the system has been powered off and AC power cords have been
disconnected from the server system.
Before Setting Up or Servicing the Intel® Server System R2600SR
Before working with this server product, observe the safety and ESD precautions found in the Warnings
section at the beginning of this manual.
System Directional Reference
All references to left, right, front, top, and bottom assume the reader is facing the front of the chassis.
Instruction Format
Each procedure described in this section follows an illustration-first format. This gives the reader the option
to follow a quicker path to system integration by first seeing an illustration of the intended procedure. If
necessary, the user can follow the step-by-step instructions that accompany each illustration.
Tools and Supplies Needed
Before setting up, configuring, and backing up (integrating) the Intel® Server System R2600SR:
1.
Observe the safety and ESD precautions found in the Warnings section in this manual.
2.
Gather the tools and supplies needed for setting up the physical system. These include:
Anti-static wrist strap and conductive foam pad (recommended)
Phillips* (cross head) screwdriver (#1 and #2 bits)
Torx 30 screwdriver
3.
Follow the procedures in the order specified.
System Integration Advisory: It is highly recommended the system integration process defined in this
chapter be performed in the order specified. This assures that critical system components are properly
installed and provides recommended cable routing. Deviating from the prescribed process can result in
improper system assembly, a longer integration process, and a less-than-desirable system appearance.
Содержание R2600SR Series
Страница 2: ...Blank page...
