Intel R2000WT, Руководство по системной интеграции и обслуживанию

Страница: 128 / 140

Intel® Server System R2000WT Product Family System Integration and Service Guide
112
Early POST Memory Initialization MRC Diagnostic Codes
Memory Initialization at the beginning of POST includes multiple functions, including: discovery, channel
training, validation that the DIMM population is acceptable and functional, initialization of the IMC and other
hardware settings, and initialization of applicable RAS configurations.
The MRC Progress Codes are displays to the Diagnostic LEDs that show the execution point in the MRC
operational path at each step.
Table 6. MRC
Progress
Codes
Checkpoint
Diagnostic LED Decoder
Description
1 = LED On, 0 = LED Off
Upper Nibble
Lower Nibble
MSB LSB
8h 4h 2h 1h 8h 4h 2h 1h
LED #7 #6 #5 #4 #3 #2 #1 #0
MRC Progress Codes
B0h
1 0 1 1 0 0 0 0 Detect DIMM population
B1h 1 0 1 1 0 0 0 1 Set DDR3 frequency
B2h 1 0 1 1 0 0 1 0 Gather remaining SPD data
B3h 1 0 1 1 0 0 1 1 Program registers on the memory controller level
B4h 1 0 1 1 0 1 0 0 Evaluate RAS modes and save rank information
B5h 1 0 1 1 0 1 0 1 Program registers on the channel level
B6h 1 0 1 1 0 1 1 0 Perform the JEDEC defined initialization sequence
B7h 1 0 1 1 0 1 1 1 Train DDR3 ranks
B8h 1 0 1 1 1 0 0 0 Initialize CLTT/OLTT
B9h 1 0 1 1 1 0 0 1 Hardware memory test and init
BAh 1 0 1 1 1 0 1 0 Execute software memory init
BBh 1 0 1 1 1 0 1 1 Program memory map and interleaving
BCh 1 0 1 1 1 1 0 0 Program RAS configuration
BFh 1 0 1 1 1 1 1 1 MRC is done
Should a major memory initialization error occur, preventing the system from booting with data integrity, a
beep code is generated, the MRC will display a fatal error code on the diagnostic LEDs, and a system halt
command is executed. Fatal MRC error halts do NOT change the state of the System Status LED, and they do
NOT get logged as SEL events. The following table lists all MRC fatal errors that are displayed to the
Diagnostic LEDs.
NOTE: Fatal MRC errors will display POST error codes that may be the same as BIOS POST progress codes
displayed later in the POST process. The fatal MRC codes can be distinguished from the BIOS POST
progress codes by the accompanying memory failure beep code of 3 long beeps as identified in Table 59.