FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the two following condi-
tions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that may cause undes-
ired operations.
The board has been tested and verified to be within the energy emission limits for Class B digital
devices as defined in Part 15 of the FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential situation. This board generates, uses and can radi-
ate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. Installed correctly, it probably will not interfere
with your radio or TV. However, we do not guarantee the absence of interference.
If you modify the board in any way, without getting approval from Intel Corporation, your board may
violate FCC regulations. Violation of FCC regulations may cause the FCC to void your right to use
the modified board. Only peripherals (computer input/output devices, terminals, printers, etc.) certi-
fied to comply with the Class B limits may be attached to the computer containing the board. Opera-
tions with non-certified peripherals is likely to result in interference with radio and TV reception.
NOTE: Use only shielded, grounded cables.
If you suspect this board is causing interference, turn your computer on and off while your radio or
TV is showing interference. If the interference disappears when you turn the computer off and reap-
pears when you turn the computer on, something in the computer is causing interference.
To reduce interference, try these suggestions:
•
Change the direction of the radio or TV antenna.
•
Move the computer or the radio or TV. For example, if the computer is to the right of the TV,
move it to the left of the TV. Or, move the computer farther away from the radio or TV.
•
Plug the computer into a different outlet. Don’t plug your radio or TV into the same circuit as
your computer.
•
Ensure that all expansion slots (on the back or side of the computer) are covered. Also, ensure
that all metal retaining brackets are tightly attached to the computer.
If these suggestions don’t help, consult your computer dealer or an experienced radio/TV technician
for more suggestions.
Industry Canada’s Compliance Statement
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equip-
ment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
