Chapter 2 Getting Started
11
installation, the bottom of the screen keeps you apprised of the installation’s
progress.
17
After the installation is complete, use the arrow keys to position the cursor on
commit as follows:
setup
Initial Intel Cache Setup
install
Install Intel Cache
–commit
Commit Setup Changes
18
Pressing the Enter key starts the final phase of the initialization process as
well as the cache application. The bottom of the screen indicates that the
cache application has started and prompts you to press the Enter key a second
time.
19
When the
Initialization Complete!
prompt appears, press the Enter
key to reboot the appliance. Rebooting the appliance takes several minutes.
During the reboot process, random characters might appear in the window of
the VT100 terminal emulator screen.
20
After your system completes the boot procedure, a console login prompt
appears with fields for both a login and password. At the prompt, supply
admin
for both the login and password, and press Enter.
21
After the login completes, the initial menu appears with additional selections:
setup
Initial Intel Cache Setup
–main
Main Intel Cache Controls
config
Intel Cache Configuration
monitor
View Statistics
expert
Enter Expert Mode
save
Save Config to Floppy
load
Load Config from Floppy
logoff
Logoff
Note
The system starts with factory settings. You can further configure or customize
the appliance by following the guidelines in Chapter 4‚ Configuring the
Appliance.
Once the software is running, you can access the system through a web browser
by using the system’s IP Address with an appended
:8081
as the URL. For
information on accessing the manager UI, refer to Accessing the Manager UI‚ on
page 12.
