Intel M20NTP1UR, Руководство по системной интеграции и обслуживанию

Страница: 32 / 114

Intel® Server System M20NTP1UR - System Integration and Service Guide
32
4. Remove the riser card assembly from the system (See Figure 26 )
Figure 26. Riser Card Bracket Removal
•
Grasp the riser card assembly with both hands and carefully pull it up and away from the chassis.
5. Locate, Unpack, and Install the PCIe* Add-in card into one of the riser cards (See Figure 27 )
Figure 27. PCIe* Add-in Card Installation
• Loosen and remove the screw securing the filler panel to the riser assembly (see Letter “A”)
•
Remove the filler panel from the add-in card slot (see Letter “B”).
• Insert the add-in card until it is fully seated within the PCIe* slot on the riser card (see Letter “C”).
•
Using the screw, secure the add-in card to the riser card assembly (see Letter “D”).
Note: For add-in cards with internal cable connectors, it may be necessary to connect cable(s) before
installing the riser card assembly back into the system. See Appendix B for cable routing guidance.
If necessary, repeat Step 5 for installation of a 2 nd PCIe* Add-in card
Riser Card 2
Riser Card 1