Intel LGA771 Скачать руководство пользователя страница 8

Страница: 8 / 38

Introduction

LGA 771 Socket Mechanical Design Guide

1.2

Terminology

1.3

Reference Documents

Note:

Contact your Intel representative for the latest revisions of these documents.

Term

Description

LGA771 Socket

Processor in the 771-land package mates with the system board through a surface

mount, 771-pin, LGA (land grid array) socket.

LGA771-Land
LGA771 Package

Processors in the 771-Land package are available in a Flip-Chip Land Grid Array

package technology, consisting of a processor core mounted on a substrate with an

integrated heat spreader (IHS). This packaging technology employs a 1.09 mm x

1.17 mm pitch for the substrate lands. Refer to the processor datasheet for

additional information.

IHS (Integrated Heat

Spreader)

A component of the processor package used to enhance the thermal performance of

the package. Component thermal solutions interface with the processor at the IHS

surface.

Lead-free / Pb-free

Lead has not been intentionally added, but lead may still exist as an impurity below

1000 ppm.

RoHS compliant

Lead and other materials banned in RoHS Directive are either (1) below all applicable

substance thresholds as proposed by the EU or (2) an approved/pending exemption

applies. (Note: RoHS implementing details are not fully defined and may change).

Document

Intel Order Number

Dual-Core Intel® Xeon® Processor 5000 Series Datasheet

313079

Dual-Core Intel® Xeon® Processor 5100 Series Datasheet

313355

Dual-Core Intel® Xeon® Processor 5000 Series Thermal/Mechanical Design Guide

313062

Dual-Core Intel® Xeon® Processor 5100 Series Thermal/Mechanical Design Guide

313357

Quad-Core Intel® Xeon® Processor 5300 Series Datasheet

315569

Quad-Core Intel® Xeon® Processor 5300 Series Thermal/Mechanical Design Guide

315794

Содержание LGA771







































Результаты поиска

Содержание LGA771

Отзывы:

Бренды по названию

Популярные бренды

Intel LGA771, Руководство по конструкции

Результаты поиска

Содержание LGA771

Отзывы:

Бренды по названию

Популярные бренды