- -
Intel Atom Series User’s Manual
2.3
Installing Memory Module
This motherboard provides two 204-pin DDRIII (Double Data Rate) SO-DIMM slots.
Before starting the installation, please read the following warning messages:
1. Make sure your purchased memory specification is supported with the motherboard;
2. Before installing or removing memory, make sure that the computer is turned off;
3. The memory is designed with fool-proof marker, if you insert with wrong direction, it can
not be inserted.
Installing memory:
1. Before installing or removing memory, please turn off the power and unplug the AC cable.
2. Carefully grasp both ends of memory, and do not touch the metal contacts.
3. Align the memory to slots, and pay attention to the direction.
4. Inclining 30 degrees and insert, then press down untill you hear the "clicking" sound (to
avoid any demage, your strengh must be gentle).
5. To remove the memory, push out both latch of DIMM slot at the same time, and take it
out.
Memory installation illustration (only for reference):
Installation of Dual Memory Channels
This board has 2 DIMM slots, and each one representing a memory channel. The memory
works on dual channel mode only when this two memories have been all installed successfully
(Note
：
When use the dual channel mode, you must select the memories which with the same
capacity, frequency, and brand at the same time).
：
Static will demage the electronic components of computer and memory, when doing
above step, you should contact with a grounded metial object to remove the static from your
body.
