manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Руководство пользователя, Страница: 854 / 1898

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Скачать руководство пользователя страница 854

2:606

Volume 2, Part 2: External Interrupt Architecture

10.4

External Interrupt Delivery

The architectural interrupt model in 

Section 5.8

 defines how each interrupt vector 

cycles through one of four states:

•

Inactive

: there is no interrupt 

pending

 on this vector.

•

Pending

: an interrupt has been received by the processor on this vector, but has 

not been 

accepted

 by the processor and has not been 

acquired

 by software. The 

processor hardware will 

accept

 the interrupt when this vector’s priority level is 

higher than the highest currently in-service vector, PSR.i is one, and TPR settings 
do not mask the interrupt. This will cause the processor to transfer control flow to 
the external interrupt handler. Software can then 

acquire

 the highest priority, 

pending, unmasked vector by reading the IVR control register. The IVR read returns 
the 8-bit vector number in a register and masks all vectors that have equal or lower 
priority. This vector now enters the In-Service/None Pending state.

•

In-Service/None Pending

: an interrupt has been received by the processor on this 

vector, and has been acquired by software (by reading the IVR control register), but 
software has not 

completed servicing

 this interrupt. In this state, the processor 

masks all vectors that have equal or lower priority. In this state, the processor can 
receive and remember a second interrupt on this vector. If this happens, the 
processor transitions this vector to the “In-Service/One Pending” state. If software 

completes the interrupt

 service routine (indicated to the processor by writing the 

EOI register) before another interrupt is received on this vector, then the processor 
returns this vector to the Inactive state, and all vectors with equal or lower priority 
are unmasked.

•

In-Service/One Pending

: an interrupt has been received by the processor on this 

vector, and has been acquired by software (by reading the IVR control register), 
and software has not completed servicing this interrupt. Additionally, the processor 
received a second interrupt on this vector, which is now held pending. If additional 
interrupts on this vector are received by the processor while this vector is in the 
“In-Service/One Pending” state, those additional interrupts are not distinguishable 
by the processor hardware. When software completes the interrupt service routine 
for the original interrupt on this vector (indicated to the processor by writing the 
EOI register), then the processor returns this interrupt vector to the Pending state 
for the second interrupt that was received on this vector. Additionally, all vectors 
with equal or lower priority are unmasked.

It is recommended the following structure for an Itanium architecture-based external 
interrupt handler:

1. Read and Save TPR, i.e. save Old Task Priority variable (optional).

2. External Interrupt Harvest Loop:

a. Read the IVR control register to determine which vector is being delivered. If 

the returned IVR value is 15, then this is a spurious interrupt and it can be 
can ignored; software can now clear PSR.ic, restore IPSR and IIP and then 

rfi

 to the interrupted context. If the returned IVR value is not 15, continue 

with step 2b.

b. Raise TPR register to the interrupt class to which the level read out of IVR 

belongs (optional).

Содержание ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов