manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Руководство пользователя, Страница: 614 / 1898

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Скачать руководство пользователя страница 614

2:366

Volume 2, Part 1: Processor Abstraction Layer

PAL_BRAND_INFO

PAL_BRAND_INFO – Provides Processor Branding Information 

(274)

Purpose:

Provides processor branding information.

Calling Conv:

Stacked Registers

Mode:

Physical and Virtual

Buffer:

Not dependent

Arguments:

Returns:

Status:

Description:

PAL_BRAND_INFO procedure calls are used to ascertain the processor branding 
information.

The 

info_request

 input argument for PAL_BRAND_INFO describes which processor 

branding  information is being requested. The 

info_request

 values are split into two 

categories: architected and implementation-specific. The architected 

info_request

 have 

values from 0-15. The implementation-specific 

info_request

 have values 16 and above. 

The architected 

info_request

 are described in this document. The  

implementation-specific 

info_request

 are described in processor-specific documentation.

This call returns the processor brand information as requested with the 

info_request

 

argument. 

Table 11-62

 describes the values.

This procedure will return an invalid argument if an unsupported 

info_request

 argument 

is passed as an input or a -6 if the requested information was not available on the 
current processor.

Argument

Description

index

Index of PAL_BRAND_INFO within the list of PAL procedures.

info_request

Unsigned 64-bit integer specifying the information that is being requested. (See 

Table 11-62

)

address

Unsigned 64-bit integer specifying the address of the 128-byte block to which the processor 
brand string shall be written.

Reserved

0

Return Value

Description

status

Return status of the PAL_BRAND_INFO procedure.

brand_info

Brand information returned. The format of this value is  dependent on the input values 
passed.

Reserved

0

Reserved

0

Status Value

Description

0

Call completed without error

-1

Unimplemented procedure

-2

Invalid argument

-3

Call completed with error

-6

Input argument is not implemented

-9

Call requires PAL memory buffer

Table 11-62. Processor Brand Information Requested

Value

Description

0

The ASCII brand identification string will be copied to the address specified in the 
address input argument. The processor brand identification string is defined to be a 
maximum of 128 characters long; 127 bytes will contain characters and the 128th byte 
is defined to be NULL (0). A processor may return less than the 127 ASCII characters 
as long as the string is null terminated. The string length will be placed in the 

brand_info

 return argument.

All Other Values

Reserved

Содержание ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов