manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Руководство пользователя, Страница: 581 / 1898

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Скачать руководство пользователя страница 581

Volume 2, Part 1: Processor Abstraction Layer

2:333

Section 11.7.3.1, “PAL Virtualization Intercept Handoff State” on page 2:333

 describes 

the handoff state of the PAL intercepts. For all interruption vectors other than 
Virtualization vector, the architectural state at the corresponding IVA-based interruption 
vector is the same as defined in 

Chapter 8, “Interruption Vector Descriptions” in Volume 

2

.

11.7.3.1

PAL Virtualization Intercept Handoff State

The state of the logical processor at virtualization intercept handoff is:

• GRs: 

• Non-banked GRs: The contents of non-banked general registers are preserved 

from the time of the interruption.

• Bank 1 GRs: The contents of all bank one general registers are preserved from 

the time of the interruption.

• Bank 0: GR16-23: The contents of these bank zero general registers are 

preserved from the time of the interruption.

• Bank 0: GR24-31: Scratch, contains parameters/state for VMM:

• GR24 indicates the cause of virtualization intercept. See 

Table 11-22, “PAL 

Virtualization Intercept Handoff Cause (GR24)”

 for details. This field is not 

provided to the VMM if the value of the 

cause

 field in the 

config_options

 

parameter passed to PAL_VP_INIT_ENV is 0. If the value of the 

cause

 field 

in the 

config_options

 parameter passed to PAL_VP_INIT_ENV is 0, the 

value of GR24 on virtualization intercept handoff is undefined.

• GR25 contains the 41-bit opcode in little endian format and the type of the 

instruction which caused the fault, excluding the qualifying predicate (qp) 
field. See 

Figure 11-15, “PAL Virtualization Intercept Handoff Opcode 

(GR25),” on page 2:335

 for details.

• GR26-31 are available for the VMM to use.

• FRs: The contents of all floating-point registers are preserved from the time of the 

interruption.

• Predicates: The contents of all predicate registers are undefined and available for 

use. The original contents are saved in the VPD.

• BRs: The contents of all branch registers are preserved from the time of the 

interruption.

• ARs: The contents of all application registers are preserved from the time of the 

interruption, except the ITC and RUC counters. The ITC register will not be directly 
modified by PAL, but will continue to count during the execution of the virtualization 
intercept handler. The RUC register will not be directly modified by PAL, but will 
continue to count during the execution of the virtualization intercept handler while 
the processor is active.

• CFM: The contents of the CFM register is preserved from the time of the 

interruption.

• RSE: All RSE state is preserved from the time of the interruption.
• PSR: PSR fields are set according to the “Interruption State” column in 

Table 3-2, 

“Processor Status Register Fields” on page 2:24

. PSR.up and pp are set to 0 when 

fr_pmc

 field in 

config_options

 parameter during PAL_VP_INIT_ENV is 1.

• CRs: The contents of all control registers are preserved from the time of the 

interruption with the exception of resources described below.

Содержание ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов