manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Руководство пользователя, Страница: 1051 / 1898

Поделиться
Скачать
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Скачать руководство пользователя страница 1051

3:152

Volume 3: Instruction Reference

ld

For more details on ordered, biased, speculative, advanced and check loads see 

Section 4.4.4, “Control Speculation” on page 1:60

 and 

Section 4.4.5, “Data 

Speculation” on page 1:63

. For more details on ordered loads see 

Section 4.4.7, 

“Memory Access Ordering” on page 1:73

. See 

Section 4.4.6, “Memory Hierarchy 

Control and Consistency” on page 1:69

 for details on biased loads. Details on memory 

attributes are described in 

Section 4.4, “Memory Attributes” on page 2:75

.

For the non-speculative load types, if NaT bit associated with GR 

r

3

 is 1, a Register NaT 

Consumption fault is taken. For speculative and speculative advanced loads, no fault is 
raised, and the exception is deferred. For the base-update calculation, if the NaT bit 
associated with GR 

r

2

 is 1, the NaT bit associated with GR 

r

3

 is set to 1 and no fault is 

raised.

The value of the 

ldhint

 completer specifies the locality of the memory access. The values 

of the 

ldhint

 completer are given in 

Table 2-34

. A prefetch hint is implied in the base 

update forms. The address specified by the value in GR 

r

3

 after the base update acts as 

a hint to prefetch the indicated cache line. This prefetch uses the locality hints specified 
by 

ldhint

. Prefetch and locality hints do not affect program functionality and may be 

ignored by the implementation. See 

Section 4.4.6, “Memory Hierarchy Control and 

Consistency” on page 1:69

 

for details.

sa

Speculative

Advanced load

An entry is added to the ALAT, and certain exceptions may be deferred. 
Deferral causes the target register’s NaT bit to be set, and the 
processor ensures that no ALAT entry exists for the target register. The 
absence of an ALAT entry is later used to detect deferral or collision.

c.nc

Check load

– no clear

The ALAT is searched for a matching entry. If found, no load is done 
and the target register is unchanged. Regardless of ALAT hit or miss, 
base register updates are performed, if specified. An implementation 
may optionally cause the ALAT lookup to fail independent of whether an 
ALAT entry matches. If not found, a load is performed, and an entry is 
added to the ALAT (unless the referenced data page has a 
non-speculative attribute, in which case no ALAT entry is allocated).

c.clr

Check load

– clear

The ALAT is searched for a matching entry. If found, the entry is 
removed, no load is done and the target register is unchanged. 
Regardless of ALAT hit or miss, base register updates are performed, if 
specified. An implementation may optionally cause the ALAT lookup to 
fail independent of whether an ALAT entry matches. If not found, a clear 
check load behaves like a normal load.

c.clr.acq

Ordered check load 

– clear

This type behaves the same as the unordered clear form, except that 
the ALAT lookup (and resulting load, if no ALAT entry is found) is 
performed with acquire semantics.

acq

Ordered load

An ordered load is performed with acquire semantics.

bias

Biased load

A hint is provided to the implementation to acquire exclusive ownership 
of the accessed cache line.

Table 2-34. Load Hints

ldhint

 Completer

Interpretation

none

Temporal locality, level 1

Table 2-33.

Load Types (Continued)

ldtype

Completer

Interpretation

Special Load Operation

Содержание ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов