Introduction
11
English
1
Ground
+12V
Sense
JCPU_FAN
JPWR_FAN
JSYS_FAN
CPU / Power / Chassis Fan Power Connectors
JCPU_FAN:
Connect the CPU fan to this connector.
JPWR_FAN:
Use this connector if you are installing an
additional fan in the unit.
JSYS_FAN:
The chassis fan will provide adequate
airflow throughout the chassis to prevent
overheating the CPU.
2
FDD
Floppy Drive Connector
1
3
PW1
PW12
PW1:
24-pin ATX Power Connector
PW12:
8-pin ATX12V Power Connector
The plugs of the power cables are designed to fit in only one
orientation.
4
CFPA
CFPA: Front Panel Audio Connector
This audio connector connects to the audio jacks located on the
front panel. Refer to your case manual to match the pin-out
names.
5
CD-IN: CD Audio-in connectors
This connector is used to receive audio from a CD-ROM drive,
TV tuner or MPEG card.
CD-IN
CD_IN_Left
1
CD_IN_Right
CD_Reference
Ground
+12V
Sense
Control
10
2
9
1
MIC_In
Front Line-out-R
GND
NC
NC
Key
+5V
NC
NC
Front Line-out-L
The PW1 and PW12 Power Connector must
be used simultaneously.
Connectors
Figure
Descriptions
6
CFP
CFP: Case Front Panel Connector
HD_LED
This LED indicates hard drive activity.
PWR_LED
Connects to the power indicator on the PC case.
RST
Connects to the RESET switch on the PC case.
PW_ON
Connects to the Power button on the PC case, to turn on
the system. To turn off the system, press the power
button for 4 seconds.
CIR
CSPK
CIR: IR connector
For connection to an IrDA receiver unit.
CSPK: Speaker
Connects to the case’s speaker for PC beeps.