3
Connect to Matrix Module
Stack Interface Module
AC Inp
100-2
50Hz
1.5A
Connect to Matrix Module
Stack Interface Module
AC Inp
100-2
50Hz
1.5A
Connect to Matrix Module
Stack Interface Module
AC Inp
100-2
50Hz
1.5A
Matrix Module
AC Inp
100-2
50Hz
1.5A
0
Switch 1
Switch 2
Switch 3
Intel
®
Express 530T Matrix Module
Optional Information
Stack the Switch
4
530T Switch
(Control)
Stacking Cable
Add Optional Modules
Fiber Module (MTRJ connector)
for Express 535T Switch
(ES535MFXRJ)
5
• Unplug all power cords and use the
included stacking cable to attach the 535T
switch to one of the ports on the Intel
®
Express Stack Matrix Module installed in
the 530T switch.
• Attach up to three switches to the module
for a total stack height of four switches
(one 530T and three 535T switches).
• The 535T switch must be connected to a
stack matrix module (in a 530T switch) in
order to form a stack. You cannot stack
two 535T switches together.
• The 530T or 535T switches do not stack
with the Intel
®
Express 510T or 520T
Switches or the Intel
®
Express 550F or
550T Routing Switches.
• Use optional modules to provide 100FX
connectivity for the stack, or to extend the
network beyond 100 meters.
• Unplug the power cord and remove the
10/100Base-TX module from the Module A
expansion slot on the front of the switch.
• Align the new module with the card guides
inside the switch and slide the module into
the slot. Press firmly to connect the module.
• Secure the module using the retaining
screws and plug in the power cord.
100Base-FX - MTRJ Module
Port 1
Port 2
100Base-FX - SC Module
Port 1
Tx Rx
535T Switch
(Member)
535T Switch
(Member)
535T Switch
(Member)
1
3
5
7
9
11
13
15
17
19
21
2
4
6
8
10
12
14
16
18
20
22
Link\Activity
Link = Solid Gr
een
Activity = Blinking Gr
een
Port 1
Port 2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Switch
Status
Status
Link
Stacking
Module
Module A
Module A
Intel
®
Express 5
35T Switc
h
100Base-T Module
Port 1
Port 2
Fiber Module (SC connector)
for Express 535T Switch
(ES535MFXSC)
Stack Matrix Module
Figure 4: Connect switches to the stack matrix module
Figure 5: Install optional modules in the 535T switch.
Remove the 10/100 Module before installing a 100FX
module in the Module A slot on the 535T switch.
Note:
You cannot use the stacking cables or stacking
modules from the 510T, 520T, 550T, and 550F switches
to connect the 530T and 535T switches together.
English
