Intel ESM-2740, Руководство пользователя

Страница: 64 / 93

ESM-2740/2743
64 ESM-2740/2743 User’s Manual
3.5.5.6 Suspend Type
Select the suspend type.
The choice: Stop Grant, PwrOn Suspend.
3.5.5.7 MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The choice: 3, 4, 5, 7, 9, 10, 11, or NA.
3.5.5.8 Suspend Mode
Select the suspend type.
The choice: Disable, 1, 2, 4, 8, 12, 20, 30, 40 Min, 1 Hour.
3.5.5.9 HDD Power Down
After the selected period of drive inactivity, any system IDE devices compatible with the
ATA-2 specified timeout and then waking themselves up when accessed..
The choice: Disable, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 Min.
3.5.5.10 Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state when the system has “hung”.(Only could working on ATX Power supply)
The choice: Delay 4 Sec, Instant-Off.
3.5.5.11 Wake-Up by LAN/PCI card
This will enable the system to wake up through LAN/PCI Card peripheral.
The choice: Enable, Disabled.
3.5.5.12 Power On by Ring
This determines whether the system boot up if there’s an incoming call from the Modem.
The choice: Enable, Disabled.
3.5.5.13 Resume by Alarm
This function is for setting date and time for your computer to boot up.
Reload Global Timer Events
3.5.5.14 Primary IDE 0/1,Secondary IDE 0/1,FDD,COM,LPT PORT,PCI PIRQ[A-D]#
Reload Global Timer events are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awake the system from such a mode. In effect ,the
system remain alert for anything which occurs to a device which is configured as
Enabled ,even when the system is in a power down mode.
The choice: Enable, Disabled.