manualshive.com logo in svg

Intel EMX-965GME, Руководство пользователя

Поделиться
Скачать
Intel EMX-965GME Скачать руководство пользователя страница 12

EMX-965GME 

 

12  

 

Production Introduction 

1.1 Before you Proceed 

 
Take note of the following precautions before you install motherboard components or 
change any motherboard settings. 
 

 

z

  Unplug the power cord from the wall socket before touching any 

component. 

z

  Use a grounded wrist strap or touch a safely grounded object or a 

metal object, such as the power supply case, before handling 
components to avoid damaging them due to static electricity 

z

  Hold components by the edges to avoid touching the ICs on 

them. 

z

  Whenever you uninstall any component, place it on a grounded 

antistatic pad or in the bag that came with the component. 

z

 

Before you install or remove any component, ensure that the ATX 
power supply is switched off or the power cord is detached from 
the power supply. Failure to do so may cause severe damage to 
the motherboard, peripherals, and/or components.

 

 

 

Содержание EMX-965GME












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды