Intel Desktop Board DP43TF Technical Product Specification
32
1.13.1.2
Wake-up Devices and Events
Table 8 lists the devices or specific events that can wake the computer from specific
states.
Table 8. Wake-up Devices and Events
These devices/events can wake up the computer…
…from this state
LAN
S1, S3, S4, S5
(Note 1)
PME# signal
S1, S3, S4, S5
(Note 1)
Power switch
S1, S3, S4, S5
PS/2 devices
S1, S3, S5
(Note 2)
RTC alarm
S3, S4, S5
Serial port
S3
USB
S3
WAKE# signal
S1, S3, S4, S5
Notes:
1.
For LAN and PME# signal, S5 is disabled by default in the BIOS Setup program. Setting this option to
Power On will enable a wake-up event from LAN in the S5 state.
2.
S5 wake from PS/2 is disabled by default.
NOTE
The use of these wake-up events from an ACPI state requires an operating system
that provides full ACPI support. In addition, software, drivers, and peripherals must
fully support ACPI wake events.
