Intel DG45ID - CARACTERISTIQUES TECHNIQUES Скачать руководство пользователя | Manualshive

Страница: 23 / 86

background image

Desktop Board Features

23

Fan Headers

The function/operation of the fans is as follows:

•

The fans are on when the computer is in the ACPI S0 state.

•

The fans are off when the computer is in the ACPI S3, S4, or S5 state.

•

All fan headers support closed-loop fan control that can adjust the fan speed
according to thermal conditions.

•

All fan headers have a +12 V DC connection.

The Desktop Board has a 4-pin processor fan header and two 3-pin chassis fan
headers.

LAN Wake Capabilities

CAUTION

For LAN wake capabilities, the 5 V standby line for the power supply must be capable
of delivering ad5 V standby current. Failure to provide adequate standby
current when using this feature can damage the power supply.

LAN wakeup capabilities enable remote wake-up of the computer through a network.
The LAN subsystem monitors network traffic and upon detecting a Magic Packet*
frame, it asserts a wake-up signal that powers up the computer.

Instantly Available PC Technology

CAUTIONS

For Instantly Available PC technology, the 5 V standby line for the power supply must
be capable of delivering ad5 V standby current. Failure to provide adequate
standby current when using this feature can damage the power supply and/or effect
ACPI S3 sleep state functionality.

Power supplies used with this Desktop Board must be able to provide enough standby
current to support the standard Instantly Available (ACPI S3 sleep state) configuration.
If the standby current necessary to support multiple wake events from the PCI and/or
USB buses exceeds power supply capacity, the Desktop Board may lose register
settings stored in memory.

Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-to-
RAM) sleep state. While in the S3 sleep state, the computer will appear to be off. If
the computer has a dual-colored power LED on the front panel, the sleep state is
indicated by the LED turning amber. When signaled by a wake-up device or event, the
computer quickly returns to its last known awake state.

The Desktop Board supports the

PCI Bus Power Management Interface Specification

.

Add-in cards that support this specification can participate in power management and
can be used to wake the computer.

«
...
21
22
23
24
25
...
»

Содержание DG45ID - CARACTERISTIQUES TECHNIQUES























































































Отзывы:

Нет отзывов

Похожие инструкции для DG45ID - CARACTERISTIQUES TECHNIQUES

Бренд: LAWO Страницы: 154

Бренд: ETAS Страницы: 69

Бренд: Ruckus Wireless Страницы: 102

Бренд: Zoom Страницы: 88

NVIP- NVRA0104/GO

Бренд: Novus Страницы: 44

Бренд: Qlogic Страницы: 8

Бренд: ZALMAN Страницы: 5

RouterBOARD 411R

Бренд: 4gon Страницы: 2

Бренд: Moxa Technologies Страницы: 51

Бренд: Infoblox Страницы: 13

UniFi WiFi BaseStation XG

Бренд: Ubiquiti Страницы: 19

Emotron OSTO 100

Бренд: CG Страницы: 112

Бренд: Alesis Страницы: 11

Бренд: NXP Semiconductors Страницы: 1202

Бренд: Matrix Switch Corporation Страницы: 48

Бренд: Patton electronics Страницы: 8

Бренд: DOD Страницы: 12

Бренд: ZALMAN Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды