Intel D945PLNM Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 86

background image

Overview of BIOS Features

75

automatically configured for Logical Block Addressing (LBA) and to PIO Mode 3 or 4, depending
on the capability of the drive. You can override the auto-configuration options by specifying
manual configuration in the BIOS Setup program.

To use ATA-66/100 features the following items are required:

•

An ATA-66/100 peripheral device

•

An ATA-66/100 compatible cable

•

ATA-66/100 operating system device drivers

NOTE

Do not connect an ATA device as a slave on the same IDE cable as an ATAPI master device. For
example, do not connect an ATA hard drive as a slave to an ATAPI CD-ROM drive.

3.4 System Management BIOS (SMBIOS)

SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in
a managed network.

The main component of SMBIOS is the Management Information Format (MIF) database, which
contains information about the computing system and its components. Using SMBIOS, a system
administrator can obtain the system types, capabilities, operational status, and installation dates for
system components. The MIF database defines the data and provides the method for accessing this
information. The BIOS enables applications such as third-party management software to use
SMBIOS. The BIOS stores and reports the following SMBIOS information:

•

BIOS data, such as the BIOS revision level

•

Fixed-system data, such as peripherals, serial numbers, and asset tags

•

Resource data, such as memory size, cache size, and processor speed

•

Dynamic data, such as event detection and error logging

Non-Plug and Play operating systems, such as Windows NT*, require an additional interface for
obtaining the SMBIOS information. The BIOS supports an SMBIOS table interface for such
operating systems. Using this support, an SMBIOS service-level application running on a
non-Plug and Play operating system can obtain the SMBIOS information.

3.5 Legacy USB Support

Legacy USB support enables USB devices to be used even when the operating system’s USB
drivers are not yet available. Legacy USB support is used to access the BIOS Setup program, and
to install an operating system that supports USB.

Legacy USB support operates as follows:
1.

When you apply power to the computer, legacy support is disabled.

2.

POST begins.

3.

Legacy USB support is enabled by the BIOS allowing you to use a USB keyboard to enter and
configure the BIOS Setup program and the maintenance menu.

4.

POST completes.

«
...
73
74
75
76
77
...
»

Содержание D945PLNM























































































Отзывы:

Нет отзывов

Похожие инструкции для D945PLNM

Бренд: Intertec Components Страницы: 3

Бренд: Avalue Technology Страницы: 89

RTKA788152DE0000BU

Бренд: Renesas Страницы: 11

Бренд: MAX power Страницы: 20

EZ-USB HX2LP CY4606

Бренд: Cypress Страницы: 2

Бренд: Freescale Semiconductor Страницы: 16

Бренд: Gigabyte Страницы: 116

Бренд: JETWAY Страницы: 70

Бренд: Commell Страницы: 53

Бренд: Texas Instruments Страницы: 20

Бренд: Gigabyte Страницы: 87

Бренд: Supero Страницы: 85

PRESTIGE X570 CREATION

Бренд: MSI Страницы: 88

Бренд: IEI Technology Страницы: 11

Бренд: Socket Страницы: 37

SUPERO X10DRU-X

Бренд: Supermicro Страницы: 109

Бренд: Texas Instruments Страницы: 23

DS320PR412-421EVM

Бренд: Texas Instruments Страницы: 31

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды