12
Intel Desktop Board D845GVAD2
Quick
Reference
Troubleshooting Tips
Desktop Board D845GVAD2 system fails to boot
•
Ensure that the power supply cable with the 4-pin connector is plugged into
the 12 V processor core voltage connector located near the processor socket
on the desktop board.
•
Remove and re-insert the Intel Pentium 4 processor, memory, and any
add-in cards to make sure they are fully seated. Remove any non-essential
hardware components and boot the system.
•
Disconnect all power and remove the CMOS battery. Wait 10 minutes,
then re-install the battery, reconnect power, and boot the system.
A repeating beep error code is heard and the desktop board does not boot
or show any video
This beep code may indicate a problem during detection of the DDR SDRAM
memory device. Check to ensure that system memory is properly installed and
that the DIMMs meet the Memory Module Requirements listed in the Supported
Components section of this document.
Resolving slow boot times
Extended boot time can be the result of IDE drive jumper configuration. For
additional information visit:
http://support.intel.com/support/motherboards/desktop/slowboot.htm
Customer Support Links
View or download product support information from Intel’s World Wide
Web site:
http://support.intel.com/support/motherboards/desktop/
Follow the link to your Intel Desktop Board for the following information:
•
Known Issues and Solutions
•
Software and Drivers (latest BIOS and driver updates)
•
Compatibility (supported Intel
®
processors and memory information)
•
Product Documentation
Technical Product Specification
Specification Update
Quick Reference Guide
The Intel World Wide Web site also includes telephone numbers for Intel
customer support:
•
Intel Customer Support World Wide Phone Numbers:
http://support.intel.com/support/9089.htm
•
Intel Desktop Board Email Support Form:
http://support.intel.com/support/motherboards/mobo_form.htm
If you can’t find the information you need on the Web, contact your point of
purchase.