Intel D845GEBV2 - OCTOBRE 2002, Быстрая справка, Страница: 13 / 48

Intel Desktop Boards D845GERG2 and D845GEBV2 13
Quick Reference
Using the BIOS Setup Program
The BIOS Setup program can be used to view and change the BIOS settings for
the computer. The BIOS Setup program is accessed by pressing the <F2> key
after the Power-On Self-Test (POST) memory test begins and before the
operating system boot begins.
Setting the BIOS Configuration Jumper Block
CAUTION
Always turn off the power and unplug the power cord from the computer
before changing the jumper block settings. Moving the jumper with the
power on may result in unreliable computer operation.
The BIOS configuration jumper block determines the operating mode of the
BIOS Setup Program and enables BIOS recovery in the event of a failed
BIOS update (see the previous illustration for the location of the jumper block).
OM14693
1 3
The following table describes the jumper block settings for the BIOS Setup
configuration jumper.
BIOS Setup Configuration Jumper Block Settings
Jumper Setting Mode Description
3 1
Normal (default)
(1-2) The BIOS uses the current configuration and
passwords for booting.
3 1
Configure
(2-3) After the Power-On Self-Test (POST) runs, the
BIOS displays the Maintenance Menu. Use this
menu to clear passwords.
3
1
Recovery
(None) The BIOS recovers data from a recovery
diskette in the event of a failed BIOS update.*
*To update or recover the BIOS, see the instructions in the Intel Desktop Boards D845GERG2
and D845GEBV2 Product Guide on the Intel Express Installer CD-ROM
.
For a complete list of BIOS Setup settings, see:
•
The Intel Desktop Boards D845GERG2 and D845GEBV2 Product Guide
on the Intel Express Installer CD-ROM
•
The Intel World Wide Web Site at:
http://support.intel.com/support/motherboards/desktop/