Intel D845EPT2, Спецификация, Страница: 13 / 14

Intel

Desktop Board D845EPT2 Specification Update
7
DOCUMENTATION CHANGES
The Documentation Changes listed in this section apply to the Desktop Board D845EPT2 Technical Product
Specification (Order Number A84913). All Documentation Changes will be incorporated into a future version
of that specification.
1. Change to Description of Table 40, Section 2.8.3, External I/O
Connectors
Table 40, Section 2.8.3, External I/O Connectors will change in its entirety as follows:
Table 1. Front Panel Audio Connector
Pin Signal Name Pin Signal Name
1 MIC_IN_FP 2 Ground
3 MIC_BIAS 4 V_5P0_AUD_ANALOG
5 R_FNTOUT 6 R_RETIN
7 Not Connected 8 Key
9 L_FNT_OUT 10 L_RETIN
2. Removed Note That Specifies USB 2.0 Support Limited to
Windows* 2000 and Windows XP From Section 1.8.2, USB
The following note will be removed in its entirety from Section 1.8.2, USB:
✏
NOTE
USB 2.0 support has been tested with Windows 2000 and Windows XP drivers
and is not currently supported by any other operating system.
3. Removed ESCD Format Reference From Section 3.3.1, PCI
Autoconfiguration
Remove the sentence “Autoconfiguration information is stored in ESCD format.” from Section 3.3.1, PCI
Autoconfiguration.