Intel Core2 Extreme QX9000 Series Скачать руководство пользователя страница 97

Страница: 97 / 104

Datasheet

Boxed Processor Specifications

7.4

Thermal Specifications

This section describes the cooling requirements of the fan heatsink solution used by the

boxed processor.

7.4.1

Boxed Processor Cooling Requirements

The boxed processor may be directly cooled with a fan heatsink. However, meeting the

processor's temperature specification is also a function of the thermal design of the

entire system, and ultimately the responsibility of the system integrator. The processor

temperature specification is in

Chapter 5

. The boxed processor fan heatsink is able to

keep the processor temperature within the specifications (see

Table 5-1

) in chassis that

provide good thermal management. For the boxed processor fan heatsink to operate

properly, it is critical that the airflow provided to the fan heatsink is unimpeded. Airflow

of the fan heatsink is into the center and out of the sides of the fan heatsink. Airspace

is required around the fan to ensure that the airflow through the fan heatsink is not

blocked. Blocking the airflow to the fan heatsink reduces the cooling efficiency and

decreases fan life.

Figure 7-7

and

Figure 7-8

illustrate an acceptable airspace clearance

for the fan heatsink. The air temperature entering the fan should be kept below 38 ºC.

Again, meeting the processor's temperature specification is the responsibility of the

system integrator.

Figure 7-7. Boxed Processor Fan Heatsink Airspace Keepout Requirements (side 1 view)

Figure 7-8. Boxed Processor Fan Heatsink Airspace Keepout Requirements (side 2 view)

Содержание Core2 Extreme QX9000 Series









































































































Результаты поиска

Содержание Core2 Extreme QX9000 Series

Отзывы:

Похожие инструкции для Core2 Extreme QX9000 Series

Бренды по названию

Популярные бренды

Intel Core2 Extreme QX9000 Series, Техническое описание

Результаты поиска

Содержание Core2 Extreme QX9000 Series

Отзывы:

Похожие инструкции для Core2 Extreme QX9000 Series

Бренды по названию

Популярные бренды