manualshive.com logo in svg

Intel BX80619I73820, Руководство по конструкции, Страница: 36 / 124

Поделиться
Скачать
Intel BX80619I73820 Скачать руководство пользователя страница 36

Independent Loading Mechanism (ILM)

36

Thermal/Mechanical Specifications and Design Guide

Note:

Figure 4-13

 is for or illustration only and may not show most current parts.

1. Carefully lower the ILM load plate on top of the processor, 
2. Verify that Load-lever-cam is over the load-plate-tab; actuate Load lever with a 

smooth uniform motion and latch to the ILM (with thumb).

3. Close the Hinge lever with a smooth uniform motion and latch to the ILM.

4.5

ILM Cover

Intel has developed a cover that will snap on to the ILM for the LGA2011 socket family.

The ILM cover is intended to reduce the potential for socket contact damage from the 
operator / customer fingers being close to the socket contacts to remove or install the 
pick and place cover. By design the ILM cover and pick and place covers can not be 
installed simultaneously.

The ILM cover concept is shown in 

Figure 4-14

.

This cover is intended to be used in place of the pick and place cover once the ILM is 
assembled to the board. The ILM will be offered with the ILM cover pre assembled as 
well as a discrete part. 

Figure 4-12. Pin 1 Markings on the ILM Frame

Figure 4-13. Closing ILM and Loadplate

Содержание BX80619I73820





























































































































Отзывы:

Нет отзывов