Datasheet, Volume 1
35
Package Mechanical Specifications
3
Package Mechanical
Specifications
The processor is packaged in a Flip-Chip Land Grid Array package that interfaces with
the motherboard using an LGA1366 socket. The package consists of a processor
mounted on a substrate land-carrier. An integrated heat spreader (IHS) is attached to
the package substrate and core and serves as the mating surface for processor thermal
solutions, such as a heatsink.
shows a sketch of the processor package
components and how they are assembled together. Refer to the appropriate processor
Thermal and Mechanical Design Guidelines (see
) for complete details on
the LGA1366 socket.
The package components shown in
include the following:
• Integrated Heat Spreader (IHS)
• Thermal Interface Material (TIM)
• Processor core (die)
• Package substrate
• Capacitors
Note:
1.
Socket and motherboard are included for reference and are not part of the processor package.
3.1
Package Mechanical Drawing
The package mechanical drawings are shown in
. The
drawings include dimensions necessary to design a thermal solution for the processor.
These dimensions include:
• Package reference with tolerances (total height, length, width, etc.)
• IHS parallelism and tilt
• Land dimensions
• Top-side and back-side component keep-out dimensions
• Reference datums
• All drawing dimensions are in mm.
• Guidelines on potential IHS flatness variation with socket load plate actuation and
installation of the cooling solution is available in the appropriate processor Thermal
and Mechanical Design Guidelines (see
Figure 3-1. Processor Package Assembly Sketch
IHS
Substrate
LGA1366 Socket
System Board
Capacitors
TIM
IHS
Substrate
LGA
System Board
Capacitors
Die
TIM
Содержание BX80613I7980
