
Intel Desktop Board DP43BF Technical Product Specification
54
2.3
BIOS Configuration Jumper Block
CAUTION
Do not move the jumper with the power on. Always turn off the power and unplug the
power cord from the computer before changing a jumper setting. Otherwise, the
board could be damaged.
Figure 14 shows the location of the BIOS configuration jumper block. The jumper
determines the BIOS Setup program’s mode. Table 27 lists the jumper settings for the
three modes: normal, configure, and recovery. When the jumper is set to configure
mode and the computer is powered-up, the BIOS compares the processor version and
the microcode version in the BIOS and reports if the two match.
Figure 14. Location of the BIOS Configuration Jumper Block
Table 27. BIOS Setup Configuration Jumper Settings
Function/Mode Jumper
Setting Configuration
Normal 1-2
The BIOS uses current configuration information and passwords
for booting.
Configure 2-3
After the POST runs, Setup runs automatically. The
maintenance menu is displayed.
Recovery None
The BIOS attempts to recover the BIOS configuration. See
Section 3.7 for more information on BIOS recovery.
Содержание BLKDP43BF
