manualshive.com logo in svg

Intel BLKDH61WWB3, Технические характеристики продукции

Поделиться
Скачать
Intel BLKDH61WWB3 Скачать руководство пользователя страница 16

Intel Desktop Board DH61WW Technical Product Specification 

16

 

1.2

 

Legacy Considerations 

This board differs from other Intel Desktop Board products, with specific changes 
including (but not limited to) the following: 

•

 

No Parallel ATA (PATA) IDE drive connector 

1.3

 

Online Support 

To find information about…  

Visit this World Wide Web site: 

Intel Desktop Board DH61WW 

http://www.intel.com/products/motherboard/index.htm

 

Desktop Board Support 

http://www.intel.com/p/en_US/support?iid=hdr+support  

Available configurations for the Intel 
Desktop Board DH61WW 

http://ark.intel.com 

 

Supported processors 

http://processormatch.intel.com

 

Chipset information 

http://www.intel.com/products/desktop/chipsets/index.htm

 

BIOS and driver updates 

http://downloadcenter.intel.com

 

Tested memory  

http://www.intel.com/support/motherboards/desktop/sb/CS-
025414.htm

 

Integration information 

http://www.intel.com/support/go/buildit

 

1.4

 

Processor 

The board is designed to support the Intel Core i7, Intel Core i5, Intel Core i3, and 
Intel Pentium processors in an LGA1155 socket.  

Other processors may be supported in the future. This board is designed to support 
processors with a maximum TDP of 95 W.  See the Intel web site listed below for the 
most up-to-date list of supported processors. 

 

For information about…  

Refer to: 

Supported processors 

http://processormatch.intel.com 

 CAUTION 

Use only the processors listed on the web site above.  Use of unsupported processors 
can damage the board, the processor, and the power supply.   

 

NOTE 

This board has specific requirements for providing power to the processor.  Refer to 
Section 2.5.1 on page 54 for information on power supply requirements for this board. 

Содержание BLKDH61WWB3























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды