Intel Desktop Board DG965RY Technical Product Specification
60
2.10.2
I/O Shield
The back panel I/O shield for the board must meet specific dimension and material
requirements. Systems based on this board need the back panel I/O shield to pass
certification testing. Figure 22 shows the I/O shield dimensions. The figure indicates
the position of each cutout. Additional design considerations for I/O shields relative to
chassis requirements are described in the ATX specification. Dimensions are given in
inches [millimeters].
NOTE
The I/O shield drawing is for reference only.
[44.9 – 0.12]
1.768 – 0.005
[15 – 0.25]
0.591 – 0.010
1.890
[48]
0.465
[11.81]
0.00
[0.00]
0.276
[7.01]
0.884
[22.45]
0.00 [0.00]
0.326 [8.27]
0.780 [19.81]
3.288 [83.52]
3.822 [97.08]
4.573 [116.15]
5.783 [146.88]
A
0.465
[11.81]
A
0.558
[14.17]
8X R0.5 MIN
[20 – 0.254]
0.787 – 0.010 TYP
[159.2 – 0.12]
6.268 – 0.005
[1.6 – 0.12]
0.063 – 0.005
[162.3]
6.390 REF
[1.55]
0.061 REF
0.039
[1]
OM18446
1.927 [48.95]
0.474
[12.04]
Figure 22. I/O Shield Dimensions
