Intel BFCBASE - Motherboard - 7300 страница 90 Скачать руководство пользователя

Страница: 90 / 142

Signal Definitions

Document Number: 318080-002

DSTBN[3:0]#

I/O

Data strobe used to latch in D[63:0]#.

DSTBP[3:0]#

I/O

Data strobe used to latch in D[63:0]#.

FERR#/PBE#

FERR#/PBE# (floating-point error/pending break event) is a multiplexed signal and

its meaning is qualified by STPCLK#. When STPCLK# is not asserted, FERR#/PBE#

indicates a floating-point error and will be asserted when the processor detects an

unmasked floating-point error. When STPCLK# is not asserted, FERR#/PBE# is

similar to the ERROR# signal on the Intel 387 coprocessor, and is included for

compatibility with systems using MS-DOS*-type floating-point error reporting. When

STPCLK# is asserted, an assertion of FERR#/PBE# indicates that the processor has a

pending break event waiting for service. The assertion of FERR#/PBE# indicates that

the processor should be returned to the Normal state. For additional information on

the pending break event functionality, including the identification of support of the

feature and enable/disable information, refer to Vol. 3 of the IA_32 Intel ®

Architecture Software Developer’s Manual and the AP-485 Intel® Processor

Identification and the CPUID Instruction application note.

FORCEPR#

The FORCEPR# (force power reduction) input can be used by the platform to cause

the Intel

Xeon

Processor 7200 Series and 7300 Series to activate the Thermal

Control Circuit (TCC).

GTLREF_ADD_MID
GTLREF_ADD_END

GTLREF_ADD determines the signal reference level for AGTL+ address and common

clock input pins. GTLREF_ADD is used by the AGTL+ receivers to determine if a signal

is a logical 0 or a logical 1. Please refer to

Table 2-17

and the appropriate platform

design guidelines for additional details.

GTLREF_DATA_MID
GTLREF_DATA_END

GTLREF_DATA determines the signal reference level for AGTL+ data input pins.

GTLREF_DATA is used by the AGTL+ receivers to determine if a signal is a logical 0 or

a logical 1. Please refer to

Table 2-17

and the appropriate platform design guidelines

for additional details.

HIT#
HITM#

I/O
I/O

HIT# (Snoop Hit) and HITM# (Hit Modified) convey transaction snoop operation

results. Any FSB agent may assert both HIT# and HITM# together to indicate that it

requires a snoop stall, which can be continued by reasserting HIT# and HITM#

together.

IERR#

IERR# (Internal Error) is asserted by a processor as the result of an internal error.

Assertion of IERR# is usually accompanied by a SHUTDOWN transaction on the

processor FSB. This transaction may optionally be converted to an external error

signal (e.g., NMI) by system core logic. The processor will keep IERR# asserted until

the assertion of RESET#.
This signal does not have on-die termination.

Table 5-1.

Signal Definitions (Sheet 4 of 8)

Name

Type

Description

Notes

Signals

Associated Strobes

D[15:0]#, DBI0#

DSTBN0#

D[31:16]#, DBI1#

DSTBN1#

D[47:32]#, DBI2#

DSTBN2#

D[63:48]#, DBI3#

DSTBN3#

Signals

Associated Strobes

D[15:0]#, DBI0#

DSTBP0#

D[31:16]#, DBI1#

DSTBP1#

D[47:32]#, DBI2#

DSTBP2#

D[63:48]#, DBI3#

DSTBP3#

Содержание BFCBASE - Motherboard - 7300















































































































































Результаты поиска

Содержание BFCBASE - Motherboard - 7300

Отзывы:

Похожие инструкции для BFCBASE - Motherboard - 7300

Бренды по названию

Популярные бренды

Intel BFCBASE - Motherboard - 7300, Техническое описание

Результаты поиска

Содержание BFCBASE - Motherboard - 7300

Отзывы:

Похожие инструкции для BFCBASE - Motherboard - 7300

Бренды по названию

Популярные бренды