Intel AXXTPME3 Скачать руководство пользователя страница 23

Intel® Trusted Platform Module Hardware User’s Guide

13

Appendix A: Installation/Assembly 

Safety Instructions

As you use your computer system, observe these safety guidelines:

Do not operate your computer system with any cover(s) (such as computer covers, 

bezels, filler brackets, and front-panel inserts) removed.

To help avoid damaging your computer, be sure the voltage selection switch on the 

power supply is set to match the alternating current (AC) power available at your 

location.

To help avoid possible damage to the server board, wait five seconds after turning 

off the system before removing a component from the server board or disconnecting 

a peripheral device from the computer.

To help prevent electric shock, plug the computer and peripheral power cables into 

properly grounded power sources. These cables are equipped with 3-prong plugs to 

ensure proper grounding. Do not use adapter plugs or remove the grounding prong 

from a cable. If you must use an extension cable, use a 3-wire cable with properly 

grounded plugs.

To help protect your computer system from sudden, transient increases and 

decreases in electrical power, use a surge suppressor, line conditioner, or 

uninterruptible power supply.

Be sure nothing rests on your computer system's cables and that the cables are not 

located where they can be stepped on or tripped over.

Do not spill food or liquids on your computer. If the computer gets wet, consult the 

documentation that came with it.

Do not push any objects into the openings of your computer. Doing so can cause fire 

or electric shock by shorting out interior components.

Keep your computer away from radiators and heat sources. Also, do not block 

cooling vents. Avoid placing loose papers underneath your computer; do not place 

your computer in a closed-in wall unit or on a rug.

When working inside your computer:

Do not attempt to service the computer system yourself, except as explained in this 

guide and elsewhere in Intel documentation. Always follow installation and service 

instructions closely. 

Turn off your computer and any peripherals.

Disconnect your computer and peripherals from their power sources. Also 

disconnect any telephone or telecommunications lines from the computer. 

Doing so reduces the potential for personal injury or shock.

Содержание AXXTPME3




































Отзывы: