Intel AXXRSBBU8, Руководство пользователя

Страница: 18 / 36

6 Intel
®
RAID Smart Battery AXXRSBBU8 User’s Guide
Note: The temperature of the battery pack is generally 15-20 degrees higher than the ambient
temperature during fast charge. Therefore, to complete the fast charge cycle, ambient
temperature should be less than 55° C. If the ambient temperature exceeds 45° C, the fast
charge cycle will terminate prematurely, thus preventing the battery pack from reaching a
fully charged state. Intel recommends mounting the battery remotely from the RAID
controller when possible to provide additional cooling.
Installing the Intel
®
RAID Smart Battery AXXRSBBU8
To install the Intel
®
RAID Smart Battery AXXRSBBU8 on the Intel
®
RAID Controller,
you must perform the following steps:
1. Remove the RAID Controller if it is already installed in the server system. For
information, see “Removing the RAID Controller” on page 6 .
2. Install the Intel
®
RAID Smart Battery AXXRSBBU8 on the RAID Controller using
one of the following methods:
— Install directly through the board-to-board connector. For information, see
“Installing Directly on the RAID Controller” on page 7 .
— Set up a remote connection through the remote BBU connector. For information,
see “Setting up a Remote Connection to the RAID Controller” on page 9 .
3. Install the RAID Controller in the server system. For information, see “Installing the
Intel
®
RAID Controller in the Server System” on page 14 .
Removing the RAID Controller
If the RAID controller is already installed in a computer, do the following to remove it
before you install the Intel
®
RAID Smart Battery AXXRSBBU8:
1. Shut down the computer, turn off the power, and unplug the power cord(s).
2. Remove the chassis cover and ground yourself before touching the RAID controller.
Carefully unplug all cables connected to the RAID controller. Press the silver spring
at the connector end of the data cables to make sure the two tiny catches release.
3. Carefully remove the RAID controller from the server board. For more information
on removing add-in cards, refer to the server board documentation.
4. Place the RAID controller on a flat, clean, static-free surface.
Installing the Intel
®
RAID Smart Battery AXXRSBBU8
You can either directly connect the Intel
®
RAID Smart Battery AXXRSBBU8 to the
RAID Controller or you can set up a remote connection to the RAID Controller.