Intel AXXRMS2LL040, Руководство пользователя по оборудованию

Страница: 23 / 46

Intel® RAID Module RMS2LL040 and RMS2LL080 Hardware User’s Guide 13
•
Allows multiple initiators to address a single target (in a fail-over configuration)
through an expander.
For more information, see http://www.lsi.com/ .
Note: Some of these chip features may not be supported by Intel
®
Integrated RAID Module
RMS2LL040 and RMS2LL080.
Flash ROM
An 4-MB CFI-compliant flash ROM is used to accommodate RAID firmware and RAID
BIOS Console 2 OpROM.
Boot Strap ROM (SEEPROM)
The serial bootstrap ROM is used to configure the LSI* LSISAS2008 Processor Chip
before the server board configures the PCI Express* registers. The bootstrap ROM sets
the Phase Lock Loop (PLL) dividers, bootstrap configuration, and so on.
Diagnostic Components
LED Placement and Function
The Intel
®
RAID Module RMS2LL040 and RMS2LL080 contain the following LEDs:
•
One surface-mounted heartbeat (“DS1B1: SAS_HB_LED”) LED (Green Color) to
indicate LSISAS2008 activity.
•
Another surface-mounted system error (“DS1B2: SAS_FLT_LED”) LED (Amber
Color) to indicate a board error.
SAS/SATA Connectors
The SAS/SATA connector shown in the following figure is the standard 7-pin SATA
internal connector used by the Intel
®
Integrated RAID Module RMS2LL040 and
RMS2LL080. These pin-outs for the serial ATA connector are not compatible with the
legacy PATA connector.