Intel AX965Q Скачать руководство пользователя страница 62

Страница: 62 / 81

ATX Main board

2.2.2.6 First / Second / Third Boot Device

The BIOS tries to load the OS from the devices in the sequence set here. The options are:

Item

Description

Floppy Floppy

Device

LS120 LS120

Device

HDD

Hard Disk Device

CDROM CDROM

Device

ZIP100 ZIP-100

Device

USB-FDD

USB Floppy Device

USB-ZIP

USB ZIP Device

USB-CDROM

USB CDROM Device

USB-HDD

USB Hard Disk Device

Legacy LAN

Network Device

Disabled

Disabled any boot device

2.2.2.7 Boot Other Device

Use this to boot another device. The options are “Enabled” and “Disabled”.

2.2.2.8 Swap Floppy Drive

A useful feature for those machines that use two floppy drives, when enabled this swaps

the A: and B: drives. This enables you to change the bootable floppy without having to open

the case and switch the cable.

2.2.2.9 Boot Up Floppy Seek

Selection of the command “Disabled” will speed the boot up.

Item

Description

Enabled

Enable Floppy Seek

Disabled

Disable Floppy Seek

Содержание AX965Q


















































































Результаты поиска

Содержание AX965Q

Отзывы:

Intel AX965Q, Руководство пользователя, Страница: 62 / 81

Результаты поиска

Содержание AX965Q

Отзывы: