Embedded Intel® Atom™ Processor N2800 with Intel® NM10 Express Chipset Development Kit User‘s Manual
99
6
Assembly/Disassembly Guide
6.1
Introduction
Please take a moment and read this manual before you start assembling or
disassembling this enclosure. Often times, rushing into unit installation can result in
damage to your enclosure, motherboard, and power supply.
6.2
Required tools
Phillips screwdriver
6.3
Board Installation Steps
1.
To remove the top lid, remove the screw (encircled in red) from the back, in the right
corner, see Figure 26. Push back the top lid ½ inches and after this, gently pull it up.
Figure 26. Removing the top lid
1 - WiFi antenna hole, 2 - DC Power jack hole
2.
Install I/O motherboard shield on the back of the enclosure.
3.
Install the motherboard on the base plate using four screws as shown in Figure 27.