Intel 945GC Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 39

Intel 945GC Скачать руководство пользователя страница 27

- 2 -

Intel 945 Series User's Manual

►

OnChip IDE Device

Click <Enter> key to enter its submenu:

IDE HDD Block Mode

Enable this field if your IDE hard drive supports block mode. Block mode enables BIOS to

automatically detect the optimal number of block read and writes per sector that the

drive can support. It also improves the speed of access to IDE devices.

IDE DMA transfer access

This item allows you to enable the transfer access of the IDE DMA then burst onto the

PCI bus and nonburstable transactions do not.

On-Chip Primary PCI IDE

The integrated peripheral controller contains an IDE interface with support for two IDE

channels. Select [Enabled] to activate each channel separately.

IDE Primary Master/Slave PIO

Each IDE channel supports a master device and a slave device. These four items let you

assign the kind of PIO (Programmed Input/Output) were used by the IDE devices.

Choose

Auto to let the system auto detect which PIO mode is best, or select a PIO mode

from 0-4.

Phoenix - AwardBIOS CMOS Setup Utility

OnChip IDE Device

  IDE HDD Block Mode
  IDE DMA transfer access
  On-Chip Primary PCI IDE
  IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
  IDE Secondary Slave UDMA

[

Enabled

]

[Enabled]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[Auto]
[Auto]
[Auto]
[Auto]

Item Help

Menu Level

►►

If your IDE hard drive
supports block mode
select Enabled for
automatic detection of
the optimal number of
block read/writes per
sector the drive can
support

*** On-Chip Serial ATA Setting***

On-Chip Serial ATA

x SATA PORT Speed Settings
x PATA IDE Mode
SATA Port

[Auto]

Disabled
Primary
P1,P3 is Secondary

↑

↓

→←

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Enabled

Phoenix - AwardBIOS CMOS Setup Utility

Integrated Peripherals

►

OnChip IDE Device

►

Onboard Device

►

SuperIO Device

x KB Power ON Password
x Hot Key Power ON

[

Press Enter

]

[Press Enter]
[Press Enter]

Enter
Ctrl-F1

Item Help

Menu Level

►

↑

↓

→←

:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

Press Enter

4.5.6 Integrated Peripherals

«
...
25
26
27
28
29
...
»

Содержание 945GC








































Отзывы:

Нет отзывов