Intel 480T, Руководство пользователя

Страница: 283 / 367

C H A P T E R 1 5 Status Monitoring and Statistics
281
•
priority
— Filters the log to display message with the selected
priority or higher (more critical). Priorities include (in order)
critical, emergency, alert, error, warning, notice, info, and debug.
If not specified, only critical priority messages are sent to the
syslog host.
Note Refer to your UNIX documentation for more information
about the syslog host facility.
Logging Configuration Changes
The local management software allows you to record all
configuration changes and their sources that are made using the CLI
by way of Telnet or the local console. The changes are logged to the
system log. Each log entry includes the user account name that
performed the change and the source IP address of the client (if
Telnet was used).
Configuration logging applies only to commands that result in a
configuration change. To enable configuration logging, use the
following command:
enable cli-config-logging
To disable configuration logging, use the following command:
disable cli-config-logging
CLI configuration logging is enabled by default.
Logging Commands
The commands described in Table 74 allow you to configure
logging options, reset the options, display the log, and clear the log.
Table 74: Logging Commands
Command Description
clear counters Clears all switch statistics and port counters.
clear log {static} Clears the log. If
static
is specified, the
critical log messages are also cleared.