Intel 480T, Руководство пользователя

Страница: 127 / 367

C H A P T E R 7 Spanning Tree* Protocol (STP)
125
Displaying STP Settings
To display STP settings, use the following command:
show stpd {<stpd_name>}
This command displays the following information:
• STPD name
• Bridge ID
• STPD configuration information
To display the STP state of a port, use the following command:
show stpd <stpd_name> port <portlist>
This command displays the following:
• STPD port configuration
• STPD state (Root Bridge, and so on)
• STPD port state (forwarding, blocking, and so on)
Disabling and Resetting STP
To disable STP or return STP settings to their defaults, use the
commands listed in Table 29.
Table 29: STP Disable and Reset Commands
Command Description
delete stpd <stpd_name> Removes an STPD. An STPD can only be removed
if all VLANs have been deleted from it. The default
STPD, s0, cannot be deleted.
disable ignore-stp vlan <name> Allows a VLAN to use STP port information.
disable stpd [<stpd_name> | all] Disables the STP mechanism on a particular STPD,
or for all STPDs.