Intel 2200BG Скачать руководство пользователя страница 28

Страница: 28 / 84

●

Ad hoc mode is disabled. The Connect button in the ad hoc connect dialog is non-
functioning.

●

Task tray icon menu: Launching an ad hoc profile and applying a profile from the
task tray menu is not available.

NOTE:

If the buttons described above are used, the following message displays:

"Another wireless LAN utility is communicating with the Intel(R) PRO/Wireless
LAN adapter. To avoid conflicts, Intel(R) PROSet has temporarily disabled its
Profile Management features."

Scanning for Available Networks

A fast way to connect to a network is to use the

Scan

button to search for a network

access point in range of your wireless adapter. When a network is found, you can
instantly

connect without a profile

create a new profile

NOTE:

Profiles with the Enable Auto-Import feature enabled will also be

displayed in the profile list of available networks. Refer to

Automatic Profile

Distribution

for more information.

To scan for available networks:

1. From the General page, select the wireless adapter on the left side pane.
2. Select the

Networks

tab.

3. Click the

Scan

button.

4. The Available Networks dialog displays the names of the available networks. Click

the

Refresh

button to refresh the list of available networks.

5. Select the network from the list, and click the

Connect

button.

6. Select the network profile name with

<no profile>

shown, and click the

Connect

button.

7. Click the

No, connect me directly without creating a profile

option. Note, you

can click

Yes, create a profile for this network now

to create a profile to be used

later.

Содержание 2200BG





















































































Результаты поиска

Содержание 2200BG

Отзывы:

Intel 2200BG, Руководство пользователя, Страница: 28 / 84

Результаты поиска

Содержание 2200BG

Отзывы: