Intek DX-460S, Инструкция по эксплуатации

Страница: 12 / 32

- 10 -
Getting Acquainted with the Product - Getting Started
English
O. VOX Indication
The VOX icon is lighted when the VOX function has been enabled.
P. Frequency Reading (25-5-75).
Not available on this model.
Q. RF Digital Meter
It indicates the transmitter RF output power.
R. Dot Matrix Indication
It provides full information on channel and all enabled functions.
S. H Icon
The H icon is lighted when the transmitter is in HIGH POWER mode.
T. S Icon
The S icon is lighted when the automatic channel scan function has been enable.
The S icon will flash if a signal is detected on a channel.
U. F Icon
Not available on this model.
GETTING STARTED
Power ON
Switch on the transceiver turning the Power/Volume knob (3) clockwise until you hear a click, the
transceiver now is in stand-by mode.
Volume adjustment
To adjust the volume, turn the volume knob (3) while using the MONITOR (16) key to listen to the
background noise of the channels.
Channel selection
Select the desired channel, using the UP/DOWN (10) keys or the channels selector (2).
Transmission
In order to transmit, press the PTT (14) key and speak with your normal voice, keeping the microphone
at about 4 cm from your mouth. The LED indicator (13) will light in red color. Release the PTT (14) key
at the end of transmission.
Receiving
Release the PTT (14) key and properly adjusting volume, you will be able to receive the incoming signals.
When receiving a signal, the LED indicator (13) will light in green colour.