Intek DRS-5070, Руководство пользователя

Страница: 18 / 44

English
Operation
- 17 -
Automatic Memory Channels Scanning
1. Press and hold the MENU (7) key for about 3 seconds to enter the MEMORY MODE. The
M icon (Q) will blink on the LCD display.
2. Shortly press the PTT (10) or CALL (11) keys to enter the MEMORY RECALL MODE. The
radio will show the last programmed memory channel.
3. Shortly press the SCAN (6) key; the unit will automatically start the automatic memory
channels scanning and the SC (M) icon will appear on the LCD display.
SCAN will automatically stop when a signal is detected on one channel, in order to listen
to the communication and SCAN will re-start when no more signal is detected on that
memory channel after about 4 seconds. If you press the PTT (10) key during the SCAN
operation, SCAN will stop automatically and radio will set the last used memory channel.
SCAN will then restart after about 14 seconds if no signals are received on that channel.
4. Press the SCAN (6) key to exit the SCAN mode.
5. To exit the MEMORY MODE switch OFF and ON the radio.
SCRAMBLER FUNCTION (DRS-5070EX)
You can enjoy privacy of communication within your group, by enabling the SCRAMBLER
function and selecting the same scrambler formula as your group members do. Two different
scrambler formulas are available and selectable (01-02). To enable the SCRAMBLER function
please proceed as follows :
1. Press and hold the LIGHT (17) key for about 3 seconds until the Sc (N) indication appears
and the SCR (F) icon will blink on the LCD display.
2. Press the UP (15) or DN (14) keys to select the desired formula (01-02). Selecting oF will
disable the SCRAMBLER function.
2. Press the PTT (10) or CALL (11) keys to confirm the selection and exit to Stand-by mode.
4. When the SCRAMBLER function is enabled, the SCR i(F) icon appears on the LCD
display.
5. Please make sure that other group members have enabled SCRAMBLER function and
select the same formula.
6. To disable the SCRAMBLER function repeat the items 1-2 and select oF .