!
After few seconds the LCD display will show
At this point you must lower the empty forks to the ground. The LCD display prompt you to input known calibration load
weight.
Pick up a known load weigh and
lower the loaded forks to the ground
.
(Our example of the known load weight is 2000 kg)
Input into the system the known load weight of 2000 into the LCD display and press
“Enter key”
↵
.
The LCD display will show
Lift loaded forks just above the ground
. After few seconds the calibrated load weight value
of of 2000 will be stored in the system memory. The LCD display will prompt you to lower
“LOWER FORKS”
.
LCD Display
CALIBRATION 1
LOWER FORKS
LCD Display
CALIBRATION 1
WEIGHT =
❏
LCD Display
CALIBRATION 1
WEIGHT = 2000
LCD Display
CALIBRATION 1
LIFT LOAD
Integrated Visual Data Technology Inc. 3439 Whilabout Terrace, Oakville, Ontario, Canada L6L 0A7
www.skidweigh.com
