8
Preparing for Work – Cont’d
Leveling the Heaters
First, ensure that the pressure on the main
tires is at 40 psi, especially the right hand tire.
(Note: Most of the weight of the entire
machine rests on this wheel)
Then raise or lower the heater by
adjusting the stay. By alternating
inserting the ball lock pin between
the upper and lower holes on the
stay sleeve, the stay length can
be adjusted in ¼” (13 mm)
increments for very precise height
control. Folding the heater bank
makes it easier to make these
adjustments.
Leveling the heaters will ensure that you get
the most effective and even heating results
and at the same time prevent the heaters
scraping the ground
