Y--
Luminaire Main Body
Luminaire Frame
/
STEP 4:
Tilt and bring the Luminaire Main Body into
Luminaire Frame after the step of
"Electrical
Connections".
See
Figure 5.
STEP 5:
____ ... ---
--
·-t··•·-�.
,:�\\\�\\
Place the Luminaire Main Body by horizontal
onto Luminaire Frame, fine tuning and ensure
the Luminaire Main Body is snapped into to
the slot of Luminaire Frame. See
Figure 6.
0
IMPORTANT
Check whether it concerns an AC(Alternating Current) based system - 100-240V/277V AC, 50/60Hz.
ELECTRICAL CONNECT/ONS -100-240V/277V AC, S0/60Hz
PHASE TO NEUTRAL WIRING
STEP 1:
Make the following Electrical Connections:
a. Connect
INPUT GROUND
conductor to
GREEN WIRE
position
of the terminal block or GROUND conductor of LED driver.
b. Connect
INPUT VOLTAGE
conductor to
BROWN WIRE
position
of the terminal block or LIVE conductor of LED driver.
c. Connect
INPUT NEUTRAL
conductor to
BLUE WIRE
position
of the terminal block or NEUTRAL conductor of LED driver.
STEP 2:
Make sure all the connection are correct.
STEP 3:
lf the fixture without a terminal block, please insulate all electrical
connections with wire nuts suitable for at least 90
°
C.
ACBASED
Input cable should be
at
least H0SRN-F 3xl.0mm
2
(SJTW 18AWG) or
outdoor grade cable with rubber sheathed(not supplied). The cable
must have a minimum cross sectional area of 1.0mm
2
(18AWG).
FIXTURE WIRING
TERMINAL BLOCK(not-provided),
Use waterproof connector for wet location.
LIVE
LIVE
BLACK
BROWN
l.'J
rn
c:,
3:
,i
GROUND
GROUND
c:,
GREEN
YELLOW-GREEN
;,:,
f-
<
rn
�
;,:,
NEUTRAL
NEUTRAL
WHITE
BLUE
*lf the fixture with built-in 3 in 1 dimming function, please connect INPUT
PO) signal conductor to DIM+ (BLUE WIRE), INPUT NEGATIVE(-) signal
conductor to DIM-(WHITE WIRE) of LED driver.
*The junction box should have the same electrical hazard protection grade and
IP rating with the luminaire.
This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of mate rial resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was purchased. They can take
-
this product for environmental safe recycling.
