3. OPERATING INSTRUCTIONS
Alternative way to match RF receiver when it is difficult to access the receivers.
Switch on the
wall-mounted
touch remote.
Save a scene as
S1 for all zones
Switch ON/OFF
the receiver you’d
like to match for
three times and
switch on.
Press the
“Learning Key”
on RF receiver.
Operating the
touch remote to
select a scene
you like.
Press S1 to recall
the first scene
setting
Switch on the
wall-mounted
touch remote.
Press a zone number
on the wall-mounted
touch remote from
Z1/Z2/Z3/Z4.
Press a zone number
on the wall-mounted
touch remote from
Z1/Z2/Z3/Z4.
Operating for S2
is the same.
When multiple receivers are matched
to the same zone, repeat the
same setting on the rest of receivers.
Touch the
slider.
Touch the
brightness slider.
LED strip lights
connected
to the RF
receiver flash.
Long press S1 untill the
LED strip light connected
to RF receiver flash. The
scene for all zones is saved.
LED strip lights
connected
to the RF
receiver flash.
The wall-mounted
touch remote and
receiver are matched
and activated.
Operating for
S2 is the same.
The wall-mounted
touch remote and
receiver are matched
and activated.
RECALL the saved scene setting.
One receiver can be matched up to a maximum of 8 wall-mounted touch remotes.
To cancel the matching: Press “Learning Key” button on the receiver for more than 3 seconds until the LED strip lights connected to the receiver flash.
The RF colour temperature change wall-mounted touch remote (ILRC021) is designed to be used with the RF receiver (ILRC014). You will need to match the
receivers before starting to use wall-mounted touch remote.
Match the RF receiver with the “Learning Key” on the receiver(s).
A. Matching the RF Receivers with Colour Temperature Change Wall-mounted Touch Remote
For all operation, first select a zone number from Z1, Z2, Z3 and Z4, then follow the instruction below to activate the selected zone.
ON/OFF INDICATOR: Blue light is ON, Yellow light is OFF (standby).
When Yellow light is on (standby), touch ON/OFF before operating and the indicator will change to Blue light.
ON/OFF: Touch to switch ON/OFF for all zones.
SWITCH
: To control SLIDER and toggle between colour temperature or brightness.
SLIDER: Touch to select colour temperature or brightness.
SAVE scene setting. (Saves a scene seeting across all zones)
e.g. S1 to be set as morning mode – white light and 100% brightness. S2 to be set as evening mode – warm light and 100% brightness. Touch S1 to
change all zones to white light and 100% brightness. Touch S2 to change all zones to warm light and 100% brightness.
B. Operating the Wall-mounted Touch Remote