Retention ring
Cable glands
Terminal block
Connection
• Operating and storage of luminaire must be within rated temperature and humidity guidelines. Operation must
be within rated input voltage.
• Keep away from strong electromagnetic radiation sources and protect from lightning strike.
• Should the unit malfunction, return to distributor or reseller. No user serviceable parts inside. Risk of electric
shock, do not disassemble or attempt to repair the luminaire.
• Do not install or use the luminaire if the casing is found to be broken.
• The luminaire must be installed by a qualified electrician.
• The luminaire should be positioned away from heat and vibration. Avoid contact with any corrosive chemicals.
• The Luminaire should be mounted in free air it is recommended not to exceed 30°C ambient.
• Never cover the luminaire with heat insulation materials.
• The luminaire should be positioned at least 1 metre away from radios, failure to do so may affect radio reception.
Notes:
Always turn off power before installation and maintenance.
CEILING INSTALLATION GUIDE
SUSPENDED INSTALLATION GUIDE
WIRING CONNECTION
Step 1
Step 1
Step 1
Step 2
Step 2
Step 3
Step 3
Step 2
IP65
Non-Dimmable
1. Ensure that the fixings provided are suitable for the
substrate. Alternative fixings may be required.
2. Mounting clips equally spaced positioned approximately
10 cm from each end of the batten.
3. Use wall plugs, fixing clips and screws provided.
4. Ensure that the fixing is safe and secure.
* Ceiling hook not provided
5. Place terminal block inside and put the plate back into position
ensuring that the gasket is in place to maintain IP65 rate.
6. Screw retention ring back and tighten cable gland.
1. Unscrew retention ring and cable gland
2. Remove cable gland from gland plate and access terminal block
3. Fit cable through cable gland and then wire it into terminal block
4. Repeat process with second cable gland if loop out is required.
Screw fix
Screw
Warranty/Technical and contact information
are all available at
www.integral-led.com
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE DISPOSED OF WITH
HOUSEHOLD WASTE. PLEASE RECYCLE WHERE FACILITIES EXIST.
CHECK WITH YOUR LOCAL AUTHORITY FOR RECYCLING ADVICE.
Integral LED is a division
of Integral Memory plc:
Unit 6, Iron Bridge Close,
Iron Bridge Business Park,
London, NW10 0UF, UK
