Integra NAC-2.3, Руководство по обслуживанию, Страница: 6 / 44

NAC-2.3
Remote Controller
Index parts and facilities
1
Standby/On button Turns on the NAC-2.3 or place it in standby mode.
2
Numeric keys Press to select one of the preset stations or the track you want to play. When entering text, you use these buttons to type in letters and special characters.
3
Preset Up/Down buttons Press to navigate through preset stations for Internet radio or FM/AM radio.
4
Album button Press to invoke the Album selection menu when working with the NAS-2.3.
5
Artist button Press to invoke the Artist selection menu when working with the NAS-2.3.
6
Genre button Press to invoke the Genre selection menu when working with the NAS-2.3.
7
Playlist button Press to invoke the Playlist selection menu when working with the NAS-2.3.
8
Mute button Press to activate the mute function. Press the button again to disable the mute function.
9
Sleep button Press to set the sleep function.
0
Music Server/iNet Radio/Tuner/Aux buttons Press to select an input source. The Tuner button toggles between FM and AM.
Index parts and facilities
A
Display button Press to change the display mode.
B
Cursor
/
/
/
buttons
Press to locate your selection.
C
Select button Determines your selection or saves a new setting.
D
Setup button Press to set up the NAC-2.3.
E
Operation buttons
,
(FR/FF) buttons
Press to fast-rewind or fast-forward the current track.
(Pause) button
Press to pause the playback.
(Play) button
Press to start playback.
(Stop) button
Press to stop the playback.
,
B/F-Skip buttons
Press to move to the previous or next track.
F
Random button Press to play the selected track list at random.
G
Repeat button Press to repeat the selected single track or track list.
H
Volume
/
buttons
Press to adjust the volume.
Changing the remote controller mode
When you use any Integra/Onkyo products other than the NAC-2.3 in the same room, the operations made with the NAC-2.3
’s remote
controller may also cause the other Integra/Onkyo products to operate. To avoid this, you can change the remote controller mode both for the NAC-2.3 and its remote controller choosing from three modes (1, 2 or 3). To change the remote controller mode for the remote controller, hold the Standby button on the remote controller and press the Select button, then release these buttons simultaneously. Within 5 seconds after releasing the buttons, enter the appropriate mode (1, 2 or 3) using the numeric keys. The default mode is 1 for both the remote controller and NAC-2.3. After changing the remote controller mode, make sure that the remote control
“Remote ID code
” on
the NAC-2.3 is set to the same mode as the remote controller. (see Page 57)