DTR-7.4
PANEL VIEWS
FRONT PANEL
Standby/On button
This button is used to set the DTR-7.4 to On or
Standby . In the standby state, the display is turned off
and the DTR-7.4 cannot be operated.
Standby indicator
Lights when the DTR-7.4 is in the standby state and
when a signal is received from the remote control-
ler.
Audio Selector button
Press to select the type of audio input signal.
Direct/Pure Audio button
Press to switch between the direct and pure audio
listening modes.
Remote control sensor
Display button
Press to display information about the current input
source signal. Each time you press the Display but-
ton, the screen changes to show you dif ferent infor
-
mation concerning the input signal.
Dimmer button
Press to set the brightness of the front display. There are
three settings available: normal, dark, and v ery dark.
The brightness of the front display can also be
changed using the remote controller .
Stereo button
Selects for the stereo listening mode.
Surround button
Selects for the Dolby Pro Logic II, DTS Neo:6,
Dolby Digital, or DTS listening modes.
THX button
Selects for the THX listening mode.
DSP /
buttons
Switches to the DSP (Digital Signal Processing) modes.
Front display
Memory button
Press to assign the radio station to which you are
currently tuned to a preset channel or press to delete
a pre viously preset station.
FM Mode button
Press to change the stereo mode from AUTO to
MONO and vice versa. Each time this button is
pressed, the AUTO indication turns on and of f indicat-
ing the current mode. If you are listening to an FM
radio station in stereo and the sound cuts out or there is
a great deal of noise, switch from A UTO to MONO.
Tuning /
buttons
These buttons used to tune into radio stations and to
select items on the onscreen setup menus (OSD).
Preset /
buttons
These buttons are used to select radio presets and to
select items on the onscreen setup menus (OSD).
Rec Out button
This b utton is used to select the input source that
you want to record via the REC OUTs (i.e., TAPE
OUT, VIDEO 1 OUT, VIEDO 2 OUT).
Zone 2 button
This button is used to select the input source for Zone
2.
Off button
This button is used to turn of f the REC OUTs (i.e.,
TAPE OUT, VIDEO 1 OUT, VIDEO 2 OUT) or
Zone 2.
Setup button
Press to enter the Setup Menu. The OSD Menu will
appear on the TV monitor as well as the front dis-
play on the DTR-7.4.
Enter button
Press to display the screen for the item that is
selected in the Setup Menu.
Return button
In the Setup Menu, press to go back one level. If
pressed while at the Main Menu, you will e xit the
Setup Menu.
Master Volume dial
Use to control the v olume in the main zone. The vol-
ume for the remote zone (Zone 2) is independent.
Video 5 Input terminals
For connecting a video camera or game de vice.
Input source buttons and indicators (DVD,
Video 1~5, Tape, Tuner, Phono, CD, and Net
Audio)
Press these buttons to select the input source for the
main zone.
To select the input source for the remote zone (Zone
2) or recording out (REC OUT), first press the Zone
2 or Rec Out button, and then press the desired
input source button. The input channel with its indi-
cator lit red is output to REC OUT and the one with
its indicator lit gr een is output to ZONE 2.
Upsampling indicator
Lights during upsampling. This function is available
when the input source is Analog/PCM and the lis-
tening mode is set to the stereo or surround mode.
Phones jack
This is a standard stereo jack for connecting stereo
headphones.
Pure Audio indicator
Lights during pure audio playback.
