17
Front Panel
1
z
On/Standby button
: Turns the unit on or into standby
mode.
2
Hybrid Standby indicator
: Lights if the unit enters
standby mode when the HDMI Through or network
standby is enabled.
3
Dolby Atmos indicator
: Stays lit when the Dolby Atmos
listening mode is selected with Height speakers or
surround back speakers enabled.
4
Monitor Out button
: Allows you to select the HDMI jack
to output the video input signals that are input to the
unit.
5
Remote control sensor
: Receives signals from the
remote controller.
6
Tone and Tone Level buttons
: Adjusts the high tone
and low tone.
7
Display
8
Listening Mode buttons
: Allows you to select the
listening mode.
9
Dimmer button (North American model)
: Switches the
brightness of the display.
RT/PTY/TP button (Australian model)
: Can be used
when receiving the station transmitting text information.
F
Memory button
: Registers or deletes a station.
G
Tuning Mode button
: Switches the tuning mode.
H
Display button
: Switches the information on the display.
I
Home button
: Displays the Home menu.
J
Cursor buttons, Tuning
jl
button, Preset
d c
button and Enter button
: Moves the cursor and
confirms the selection. When listening to AM/FM
broadcasting, tune into the station with Tuning
jl
or
select the registered station with Preset
d c
.
K
Return button
: Returns the display to the previous state.
L
Master Volume
: Allows you to adjust the volume.
M
Zone 2 button, Zone 3 button and Off button
:
Controls the multi-zone function.
N
Whole House Mode button
: Controls the WHOLE
HOUSE MODE function to play the same source in all
the multi-zone connected rooms.
O
Phones jack
: Stereo headphones with a standard plug
are connected.
P
Setup Mic jack
: The supplied speaker setup
microphone is connected.
Q
Input selector buttons
: Switches the input to be
played.
1
4
8
9
F
H
J
2
5
7
M
K
L
Q
S
R
O
N
3
G
I
6
P
(Australian models)
